Closed Cell Polyurethane Rigid Foam Insulation can reduce heating and cooling cost significantly by reducing air filtration while providing a higher R-factor per inch thickness than other insulations.

Polyurethane Foam Insulation sprayed by an experienced qualified applicator expands and conforms, filling holes and gaps providing an air tight seal.  This alone makes it far superior to any other insulation on the market today.

Polyurethane Foam Insulation is ideal for metal building interiors, providing a seamless airseal and preventing condensation, which is a common problem for metal buildings.

• Higher R-factor per inch
• Stops air infiltration, minimizes air flow
• Moisture resistant, inhibits moisture drive due to closed cell structure
• Eliminates condensation problems
• Seamless spray appliction seals cracks and crevices
• Insulates hard to reach areas
• Rigid-adds structural strength
• Will not sag or settle like conventional insulation
• Inhibits insect penetration
• No R-factor reduction over time

Insulstar polyurethane rigid Foam is a 2.0 lb closed-cell rigid foam with an R-factor of 6.8 per inch thickness, and a flamespread of <25.

Insulstar complies with the provisions of the International Building Code (IBC), International Residential Code (IRC), and Uniform Building Code (UBC).

Check with your local inspectors for code requirements in your area.

Foam Applicators, Inc. is a N.C.F.I., Inc. Gold Star certified contractor